Inclined Lifting Material Passenger Rack Pinion Elevator Hoist
Overview
SCQ200 inclined construction hoist is an inclined lifting machine that applies to the inclined buildings such as chimney, bridge, mine and power plant, etc.
Its flexibility, efficiency, safety, productivity, low energy consumption and low cost of ownership make it the best choice for construction and rental companies.
Main parts made of Q345 steel.
Variable Frequency Drive (VFD), low starting current, very smooth starting and stopping.
Features
* Standard big cage size, and, cage can be made according to the customer's request.
* The integrated and strenghten cage roof, made by a full tread plate totally welded one time to complete, ensures high strength and no leakage.
* Big and strong cage frame.
* Flap door available.
* The angle of inclination can be adjusted according to actual needs.
* LED lighting.
* Buzz alarm.
* Interlocked trap door.
* Frequency control drive units (FC), with closed-loop equipped.
* Easy access to electrical panel.
* Anti-falling safety braking system.
Technical Data
Payload capacity 2,000 kg
Lifting speed 0–35 m/min.
Angle range of inclination 0 ～ 10°
Max. lifting height 300
Cage width (internal) 1.5 m
Cage length (internal) 3.2 m
Cage height (internal) 2.35 m
Motor control FC control
Engine power per cage 2x11 kw
Safety device type centrifugal brake
Power supply range 380–500 V, 50 or 60 Hz, 3 phase
Type of mast square column 650*650 mm with bolted rack
Length mast section 1.508 m
Rack modulus 8scaffold
website:http://www.comwinning.com/climbing-scaffold/
Overview
SCQ200 inclined construction hoist is an inclined lifting machine that applies to the inclined buildings such as chimney, bridge, mine and power plant, etc.
Its flexibility, efficiency, safety, productivity, low energy consumption and low cost of ownership make it the best choice for construction and rental companies.
Main parts made of Q345 steel.
Variable Frequency Drive (VFD), low starting current, very smooth starting and stopping.
Features
* Standard big cage size, and, cage can be made according to the customer's request.
* The integrated and strenghten cage roof, made by a full tread plate totally welded one time to complete, ensures high strength and no leakage.
* Big and strong cage frame.
* Flap door available.
* The angle of inclination can be adjusted according to actual needs.
* LED lighting.
* Buzz alarm.
* Interlocked trap door.
* Frequency control drive units (FC), with closed-loop equipped.
* Easy access to electrical panel.
* Anti-falling safety braking system.
Technical Data
Payload capacity 2,000 kg
Lifting speed 0–35 m/min.
Angle range of inclination 0 ～ 10°
Max. lifting height 300
Cage width (internal) 1.5 m
Cage length (internal) 3.2 m
Cage height (internal) 2.35 m
Motor control FC control
Engine power per cage 2x11 kw
Safety device type centrifugal brake
Power supply range 380–500 V, 50 or 60 Hz, 3 phase
Type of mast square column 650*650 mm with bolted rack
Length mast section 1.508 m
Rack modulus 8scaffold
website:http://www.comwinning.com/climbing-scaffold/